Extension Spring Replacement in Nashville and Middle Tennessee
Springs, Cables and Tracks

Extension Spring Replacement

New extension springs and safety cables for doors with springs along the horizontal tracks.

Extension springs run along the horizontal tracks on either side of the door and stretch as it lowers. They are common on older homes and lighter doors. When one breaks, it can whip across the garage, so safety cables running through the springs are important. Homeowners in Nashville with older garages often call us when a spring snaps or the door starts to lean.

We check the door weight and the springs on both sides, which are often color coded for load. We replace springs in pairs, install or replace the safety cables, inspect the pulleys, cables and track brackets and rebalance the door. If your system lacks safety cables, we add them. We also talk with you about whether converting to torsion springs makes sense for a smoother, longer-lasting setup. If your garage is older, we also look at the track hangers and the ceiling mounts, since those carry the stretch of the springs. Loose or rusted mounts can fail even when the springs are new, so we tighten or replace them as part of the job.

Matched pairs

Springs on both sides must match in strength, so we replace them together and verify the weight rating.

Safety cables

A cable through each spring keeps pieces from flying if a spring breaks. We install them where they are missing.

Pulleys and cables

Worn pulleys and frayed cables are common and are replaced during the repair.

Conversion option

Torsion springs are smoother and longer lasting on many doors, and we explain when a conversion is worth it.

What is included

  • Door weight check
  • Matched extension springs
  • Safety cables
  • Pulley and cable inspection
  • Balance adjustment
  • Conversion advice
Before and after

See the transformation.

Drag the handle to compare.

After: a garage door with the same door repaired, level in its tracks and closing neatlyBefore: a garage door with a door hanging crooked with one side dropped and a bent sectionBeforeAfter
A door off its track made straight and safe. From a door hanging crooked with one side dropped and a bent section to the same door repaired, level in its tracks and closing neatly.
Why it works

What you get with Extension Spring Replacement

Matched springs

Both sides sized to the door.

Safety cables

Installed or replaced.

Pulley and cable check

Wear inspected.

Track bracket review

Mounts checked.

Balance test

Door set level and even.

Conversion advice

Torsion option explained.

Try it now

Garage Door Size and Clearance Planner

Enter your opening and the headroom, side room and back room you have to see the standard door sizes and track types that usually fit.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you want or what the door is doing, and we set an estimate visit that fits your day.

  2. 02

    Measure and plan

    We measure the opening and the headroom, side room and back room, check the framing and note options for the door, tracks and opener.

  3. 03

    Choose and confirm

    You get a plain written scope with the door model, insulation, hardware, opener and schedule, and you approve it before anything is ordered.

  4. 04

    Order and prepare

    The door and parts are ordered or built to your size, and we confirm the install day once they arrive.

  5. 05

    Install and adjust

    We remove the old door, set the tracks, hang the door, balance the springs, mount the opener and test every safety feature.

  6. 06

    Walk through

    We clean up, haul away the old door if you asked, walk you through the finished work and explain how to care for it.

Questions

Extension Spring Replacement FAQ

Are extension springs dangerous?

They can be if they break without safety cables. We always install cables.

Can I replace one spring?

We recommend replacing both so the door stays level and balanced.

How can I tell what type I have?

Extension springs run along the sides of the door tracks, while torsion springs sit above the door on a shaft.

Is conversion worth it?

For heavy or frequently used doors it often is. We explain the tradeoffs.

How long do extension springs last?

They wear with cycles, and many last several years in normal use.

Next step

Get your Free Estimate for Extension Spring Replacement.

Tell us about your project and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your garage door project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate