Bring a door that has jumped its track back into line safely, and repair bent tracks, rollers and brackets.
A door that has come off its track is one of the more dangerous garage door problems. The sections may hang crooked, the cables may be slack and any attempt to run the door can make it worse. It often happens after a vehicle bumps the door, after a broken roller or when the track bends or loosens. We bring doors back into line safely and repair the cause.
We secure the door first, relieve the load safely and then inspect the tracks, brackets, rollers, hinges and cables. Bent track sections can often be straightened, but severe bends call for new track. We replace damaged rollers and hinges, reset the cables and test the door by hand before we use the opener. Finally we check the balance and the safety features so the door runs the way it should.
An off-track door can fall. We support it and relieve the load before we touch the tracks.
We check for bends, loose mounts and wear that let the door leave the track in the first place.
A broken roller or cracked hinge is a common cause, and we replace them as needed.
Cables can unwind or jump the drum. We reset or replace them and recheck the spring balance.
Drag the handle to compare.
BeforeAfterDoor secured and put back on track.
Straightened or replaced.
Worn parts swapped.
Cables checked and rewound.
Springs and travel reviewed.
Sensors and reverse tested.
Every topic has its own page with what to expect and how we approach it.
Top brandFrost KingA maker of weatherization products such as weatherstripping and insulation kits for doors and windows.Learn more 
Top brandWD-40A maker of lubricants, penetrating oils, cleaners and rust protection products, including a specialist line for garage doors.Learn more Top brand3-IN-ONEA long-running brand of household oils and lubricants, including products marketed for garage doors.Learn more Pick a new door, spring, opener, repair or commercial job, set the quantity and add extras to see a ballpark planning range for your project.
You tell us what you want or what the door is doing, and we set an estimate visit that fits your day.
We measure the opening and the headroom, side room and back room, check the framing and note options for the door, tracks and opener.
You get a plain written scope with the door model, insulation, hardware, opener and schedule, and you approve it before anything is ordered.
The door and parts are ordered or built to your size, and we confirm the install day once they arrive.
We remove the old door, set the tracks, hang the door, balance the springs, mount the opener and test every safety feature.
We clean up, haul away the old door if you asked, walk you through the finished work and explain how to care for it.
We recommend against it. The door and the springs can cause serious injury.
Common causes are impact, worn rollers, bent track or loose brackets.
Minor bends can be straightened. Severe damage means a new track.
If we fix the cause, it should not. We also check the opener and balance.
Yes, once the tracks, cables and springs are checked and the safety features tested.
Garage Door Track Repair and AlignmentStraighten, realign or replace bent and loose tracks so the door glides smoothly and stays on its path.Explore 
Garage Door Roller ReplacementReplace worn, noisy or cracked rollers with smooth nylon or sealed-bearing rollers for quieter, easier travel.Explore 
Garage Door Cable Repair and ReplacementReplace frayed, snapped or slipped lift cables safely, with drums, pulleys and balance checked.Explore 
Broken Garage Door Emergency RepairFast help when a door is stuck open, a spring snaps or a vehicle hits it, with the…Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
