Fix a door that sticks, binds, jerks or moves slowly by finding the worn part or setting causing it.
A door that sticks, jerks or crawls is telling you something. It may be dry, dirty or out of line, or a part may be failing. The opener may be struggling against an unbalanced door, and the extra strain shortens its life. Homeowners in Nashville call us when the door starts to take longer than it used to or when it stops partway.
We run the door and watch where it slows or catches. We check the tracks for dents and dirt, the rollers for wear, the hinges for binding and the springs for balance. We clean and lubricate where needed and replace worn parts. We also look at the opener force and travel settings, and at cold-weather stiffness, since lubricants thicken and seals stick when temperatures fall.
Dirt, dents and worn rollers make the door catch and drag, and we clean, straighten or replace as needed.
An unbalanced door makes the opener work harder and move slowly. We test and adjust within safe limits.
Binding hinges and loose brackets cause jerky travel and noise.
Cold makes lubricants and seals stiff, and ice can freeze a door to the floor. We look at seals and lubrication.
Drag the handle to compare.
BeforeAfterWe see where the door slows.
Dirt and debris removed.
Worn rollers swapped.
Springs tested.
Force and travel reviewed.
Care for hot and cold weather.
Every topic has its own page with what to expect and how we approach it.
Top brandNational HardwareA long-established maker of builder's hardware, including hinges, handles, latches and gate and garage hardware.Learn more Top brandM-D Building ProductsA North American maker of home improvement products, including weatherstripping, door sweeps and thresholds.Learn more Top brandFrost KingA maker of weatherization products such as weatherstripping and insulation kits for doors and windows.Learn more Pick a new door, spring, opener, repair or commercial job, set the quantity and add extras to see a ballpark planning range for your project.
You tell us what you want or what the door is doing, and we set an estimate visit that fits your day.
We measure the opening and the headroom, side room and back room, check the framing and note options for the door, tracks and opener.
You get a plain written scope with the door model, insulation, hardware, opener and schedule, and you approve it before anything is ordered.
The door and parts are ordered or built to your size, and we confirm the install day once they arrive.
We remove the old door, set the tracks, hang the door, balance the springs, mount the opener and test every safety feature.
We clean up, haul away the old door if you asked, walk you through the finished work and explain how to care for it.
Wear, dirt, lack of lubricant or a loss of spring tension are common causes. We check each.
The opener may sense a load or an obstruction. We check sensors, balance and force settings.
Sometimes that helps, but if parts are worn, new rollers and hinges are the lasting fix.
Yes. Lubricants thicken and seals can stick. We check both.
A struggling opener works harder and can wear out sooner, so it is worth fixing.
Garage Door Balance and AdjustmentSet spring tension and travel so the door stays where you leave it and the opener is not…Explore 
Garage Door Roller ReplacementReplace worn, noisy or cracked rollers with smooth nylon or sealed-bearing rollers for quieter, easier travel.Explore 
Garage Door Lubrication and InspectionThe right lubricant on the right parts, plus a close look at springs, rollers and hinges for early…Explore 
Garage Door Opener RepairRepair openers that hum, grind, stop partway, reverse for no reason or ignore the remote.Explore Tell us about your project and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
